Caliber: .380 ACP (9x17mm Short) Action: Double/Single action (DA/SA) Capacity: 7+1 rounds (single-stack magazine) Barrel Length: 3.5 inches Overall Length: 6.6 inches Height: 4.9 inches Width: 1.3 inches Weight: Approximately 20 ounces (unloaded) Frame: Alloy frame with a matte black or duo-tone finish (black slide, matte nickel or matte gold frame) Slide: Steel slide with serrations at the rear for grip Sights: Fixed front blade sight, dovetailed rear sight (windage adjustable) Trigger: Double-action (DA) trigger pull is heavier and longer for the first shot, then it transitions to single-action (SA) mode with a lighter and shorter trigger pull for subsequent shots Safety: Manual thumb safety, firing pin block safety, decocker (on some models) Grip: Checkered polymer grips for improved handling Magazine: Detachable single-stack magazine with a capacity of 7 rounds Operating System: Blowback-operated with a fixed barrel Finish: Matte black or duo-tone (black slide, matte nickel or matte gold frame)

Caliber: 9mm Luger (9x19mm Parabellum) Capacity: 10 or 12 rounds (comes with two magazines) Action: Striker-fired, semi-automatic Barrel Length: 3.7 inches Overall Length: 6.8 inches Height: 4.8 inches (with flush-fit magazine) Width: 1.35 inches Weight: Approximately 25.5 ounces (unloaded) Frame: Polymer frame with an integrated accessory rail (MIL-STD 1913) for lights or lasers Slide: Black or Flat Dark Earth (FDE) finish, optics-ready with a slide cut for mounting a miniature red dot sight (MRD) Sights: Co-Witnessed suppressor-height night sights (luminescent front sight and blacked-out rear sight), compatible with most miniature red dot sights Trigger: Striker-fired with a smooth and crisp trigger pull, ambidextrous safety Safety: Trigger safety, passive firing pin block safety, and fully ambidextrous slide stop lever and magazine release Grip: Textured polymer grip with interchangeable backstraps (two additional backstraps included for custom fit) Magazine: Steel magazine with polymer base plate, reversible magazine release button Operating System: Recoil-operated with a Browning-type locked-breech design Finish: Black or Flat Dark Earth (FDE) PVD (Physical Vapor Deposition) finish on the slide for enhanced durability and corrosion resistance

Caliber: 9mm Luger (9x19mm Parabellum) Capacity: 17+1 rounds (comes with one 17-round magazine and two 24-round extended magazines) Action: Striker-fired, semi-automatic Barrel Length: 4.5 inches, threaded (1/2"-28 TPI) for suppressor or muzzle device attachment Overall Length: 7.9 inches Height: 5.75 inches Width: 1.35 inches Weight: Approximately 27.9 ounces (unloaded) Frame: Polymer frame with an integrated accessory rail (MIL-STD 1913) for lights or lasers Slide: Flat Dark Earth (FDE) finish, optics-ready with a cover plate (compatible with most miniature red dot sights) Sights: Low-profile, fixed three-dot night sights (luminescent front sight and blacked-out rear sight) Trigger: Striker-fired with a smooth and crisp trigger pull, ambidextrous safety Safety: Trigger safety, passive firing pin block safety, and fully ambidextrous slide stop lever and magazine release Grip: Textured polymer grip with interchangeable backstraps (two additional backstraps included for custom fit) Magazine: Steel magazine with polymer base plate, reversible magazine release button Operating System: Recoil-operated with a Browning-type locked-breech design Finish: Flat Dark Earth (FDE) PVD (Physical Vapor Deposition) finish on the slide for enhanced durability and corrosion resistance

Caliber: 9mm Luger (9x19mm Parabellum) Capacity: 15+1 rounds (also available in 10+1 rounds for restricted states) Action: Striker-fired, semi-automatic Barrel Length: 4 inches Overall Length: 7.44 inches Height: 5.35 inches Width: 1.30 inches Weight: Approximately 24 ounces (unloaded) Frame: Polymer frame with integral Picatinny rail for accessories Slide: Matte black finish, serrations at the front and rear for slide manipulation Sights: Three-dot sight system (white dots), drift-adjustable rear sight, and front sight Trigger: Striker-fired with a smooth and consistent pull, trigger safety Safety: Trigger safety, internal drop safety, and out-of-battery safety Grip: Textured ergonomic grip with interchangeable backstraps (small, medium, and large) Magazine: Steel magazine with a polymer base plate, reversible magazine release button Operating System: Recoil-operated with a locked-breech design Finish: Black nitride finish on the slide for corrosion resistance

Caliber: .22 Magnum (WMR) Capacity: 12 rounds (tube magazine) Action: Lever-action Barrel Length: 19.25 inches Overall Length: 38.5 inches Weight: 6.75 pounds Stock: American walnut with a straight grip Sights: Adjustable semi-buckhorn rear sight, brass bead front sight Finish: Blued steel receiver and barrel Trigger: Single-stage trigger Safety: Hammer safety notch Other Features: Tubular magazine, drilled and tapped for scope mounting

Caliber: 9mm Luger (9x19mm Parabellum) Capacity: 14+1 rounds (flush-fit magazine) Action: Double-action/Single-action (DA/SA) Overall Length: 7.2 inches Barrel Length: 3.75 inches Weight: 1.75 pounds (28 ounces) unloaded Frame: Aluminum alloy frame with a black polycoat finish Slide: Cold hammer-forged steel with a black polycoat finish Sights: Fixed three-dot sights (night sights optional) Grips: Checkered rubber grips (other grip options available) Safety: Manual safety, firing pin block safety, decocker Trigger: Smooth DA/SA trigger with a decocker Magazine Type: Detachable double-stack magazine Accessory Rail: Yes, for mounting lights or lasers Other Features: Ambidextrous controls (slide stop, safety, and magazine release), serrated front and back straps for improved grip, reversible magazine release, lanyard loop.

Caliber: 7.62x39mm Action: Semi-automatic Capacity: Typically comes with a 30-round detachable box magazine (double-stack) Barrel Length: 16.25 inches Overall Length: Approximately 34.25 inches (with stock extended) Weight: Approximately 7.5 pounds (unloaded) Stock: Wooden stock (may vary in style and finish) Sights: Adjustable front post sight, rear tangent sight (usually calibrated up to 1000 meters) Finish: Blued steel (may have parkerized or matte finish depending on the model) Operating System: Long-stroke gas piston system Safety: Manual safety lever typically located on the right side of the receiver Trigger: Standard AK-style trigger with an approximate pull weight of 5 to 7 pounds Magazine Type: Detachable box magazine (often compatible with standard AK magazines) Stock Type: Fixed wooden stock (some variants may have folding or collapsible stocks) Handguard: Wooden handguard with a heat shield Bayonet Lug: Yes, most models include a bayonet lug Muzzle Device: Usually equipped with a slant muzzle brake or a compensator Accessory Compatibility: AK-style mounting for accessories such as optics, slings, and grips Manufacturer: Originally manufactured in Romania (may also be assembled or modified by Century Arms for import into the United States)

Gauge: 12 gauge Chamber: 3 inches (76mm) Capacity: 15+1 rounds (2 3/4"), 13+1 rounds (3") Action: Gas-operated semi-automatic Barrel Length: 18.5 inches Overall Length: 28.34 inches Weight: Approximately 8 pounds (unloaded) Finish: Black oxide/hard anodized Stock: Reinforced polymer bullpup design Sights: Fixed front and rear flip-up sights (Picatinny rail for optics mounting) Choke: Fixed cylinder bore Trigger: Non-adjustable trigger with a positive reset Safety: Ambidextrous safety switch Operating System: Short stroke gas piston system with self-regulating gas valve Magazine: Rotating triple magazine tubes with a selector switch (feeds from the right, left, or center tube) Accessory Compatibility: Full-length Picatinny top rail and M-LOK compatible accessory slots on the forearm Other Features: Ambidextrous mag release, forward and rear sling attachment points, patented downward ejection system for ambidextrous use, rubber recoil pad.

Gauge: 12 gauge Chamber: 3 inches (also compatible with 2-3/4 inch shells) Capacity: 5+1 rounds (with 3-inch shells) Action: Pump-action Barrel Length: 18.5 inches (also available in 20 inches) Overall Length: Approximately 39.5 to 41 inches (depending on the barrel length and stock configuration) Weight: Approximately 6.5 to 7 pounds (depending on the configuration) Finish: Matte black or blued barrel and receiver Stock: Black synthetic stock and forend with a ribbed texture for improved grip Sights: Bead front sight (some models may have a ghost ring or rifle sights) Choke: Cylinder bore (non-threaded barrel) Trigger: Standard shotgun trigger Safety: Tang-mounted safety button Magazine: Tubular magazine with a capacity of 5 rounds plus one in the chamber Receiver: Aluminum alloy receiver Accessory Compatibility: Compatible with Mossberg 500 accessories and aftermarket upgrades Other Features: Dual extractors, twin action bars for smooth and reliable cycling, cross-bolt safety, sling swivel studs for attaching a sling, drilled and tapped receiver for adding optics or accessories.

Gauge: 12 gauge Chamber: 3 inches (also compatible with 2-3/4 inch shells) Capacity: 9+1 rounds (with 3-inch shells) Action: Gas-operated semi-automatic Barrel Length: 24 inches (also available in 22 inches) Overall Length: 44.75 inches Weight: Approximately 7.75 to 8.25 pounds (depending on configuration) Finish: Matte blue/black or black synthetic stock and forend Stock: Black synthetic with adjustable length of pull (LOP) and comb height Sights: Fiber optic front sight; rear sight is not included (typically used with optics) Choke: Accu-Choke System (includes extended choke tubes) Trigger: User-adjustable trigger system Operating System: Dual gas vent system for reduced recoil and improved cycling Magazine Extension: 10-round detachable magazine extension tube Receiver: Anodized aluminum receiver with JM Pro Series engraving Safety: Tang-mounted safety button Other Features: Oversized bolt handle and release button, enlarged loading port for quick reloading, vented rib barrel for improved sight alignment, drilled and tapped receiver for optic mounting.

Caliber: .380 ACP (9x17mm Short) Action: Double/Single action (DA/SA) Capacity: 7+1 rounds (single-stack magazine) Barrel Length: 3.5 inches Overall Length: 6.6 inches Height: 4.9 inches Width: 1.3 inches Weight: Approximately 20 ounces (unloaded) Frame: Alloy frame with a matte black or duo-tone finish (black slide, matte nickel or matte gold frame) Slide: Steel slide with serrations at the rear for grip Sights: Fixed front blade sight, dovetailed rear sight (windage adjustable) Trigger: Double-action (DA) trigger pull is heavier and longer for the first shot, then it transitions to single-action (SA) mode with a lighter and shorter trigger pull for subsequent shots Safety: Manual thumb safety, firing pin block safety, decocker (on some models) Grip: Checkered polymer grips for improved handling Magazine: Detachable single-stack magazine with a capacity of 7 rounds Operating System: Blowback-operated with a fixed barrel Finish: Matte black or duo-tone (black slide, matte nickel or matte gold frame)

Caliber: 7.62x39mm Action: Semi-automatic Capacity: Typically comes with a 30-round detachable box magazine (double-stack) Barrel Length: 16.25 inches Overall Length: Approximately 34.25 inches (with stock extended) Weight: Approximately 7.5 pounds (unloaded) Stock: Wooden stock (may vary in style and finish) Sights: Adjustable front post sight, rear tangent sight (usually calibrated up to 1000 meters) Finish: Blued steel (may have parkerized or matte finish depending on the model) Operating System: Long-stroke gas piston system Safety: Manual safety lever typically located on the right side of the receiver Trigger: Standard AK-style trigger with an approximate pull weight of 5 to 7 pounds Magazine Type: Detachable box magazine (often compatible with standard AK magazines) Stock Type: Fixed wooden stock (some variants may have folding or collapsible stocks) Handguard: Wooden handguard with a heat shield Bayonet Lug: Yes, most models include a bayonet lug Muzzle Device: Usually equipped with a slant muzzle brake or a compensator Accessory Compatibility: AK-style mounting for accessories such as optics, slings, and grips Manufacturer: Originally manufactured in Romania (may also be assembled or modified by Century Arms for import into the United States)

Caliber: 9mm Luger (9x19mm Parabellum) Capacity: 14+1 rounds (flush-fit magazine) Action: Double-action/Single-action (DA/SA) Overall Length: 7.2 inches Barrel Length: 3.75 inches Weight: 1.75 pounds (28 ounces) unloaded Frame: Aluminum alloy frame with a black polycoat finish Slide: Cold hammer-forged steel with a black polycoat finish Sights: Fixed three-dot sights (night sights optional) Grips: Checkered rubber grips (other grip options available) Safety: Manual safety, firing pin block safety, decocker Trigger: Smooth DA/SA trigger with a decocker Magazine Type: Detachable double-stack magazine Accessory Rail: Yes, for mounting lights or lasers Other Features: Ambidextrous controls (slide stop, safety, and magazine release), serrated front and back straps for improved grip, reversible magazine release, lanyard loop.

Caliber: 9mm Luger (9x19mm Parabellum) Capacity: 10 or 12 rounds (comes with two magazines) Action: Striker-fired, semi-automatic Barrel Length: 3.7 inches Overall Length: 6.8 inches Height: 4.8 inches (with flush-fit magazine) Width: 1.35 inches Weight: Approximately 25.5 ounces (unloaded) Frame: Polymer frame with an integrated accessory rail (MIL-STD 1913) for lights or lasers Slide: Black or Flat Dark Earth (FDE) finish, optics-ready with a slide cut for mounting a miniature red dot sight (MRD) Sights: Co-Witnessed suppressor-height night sights (luminescent front sight and blacked-out rear sight), compatible with most miniature red dot sights Trigger: Striker-fired with a smooth and crisp trigger pull, ambidextrous safety Safety: Trigger safety, passive firing pin block safety, and fully ambidextrous slide stop lever and magazine release Grip: Textured polymer grip with interchangeable backstraps (two additional backstraps included for custom fit) Magazine: Steel magazine with polymer base plate, reversible magazine release button Operating System: Recoil-operated with a Browning-type locked-breech design Finish: Black or Flat Dark Earth (FDE) PVD (Physical Vapor Deposition) finish on the slide for enhanced durability and corrosion resistance

Caliber: 9mm Luger (9x19mm Parabellum) Capacity: 17+1 rounds (comes with one 17-round magazine and two 24-round extended magazines) Action: Striker-fired, semi-automatic Barrel Length: 4.5 inches, threaded (1/2"-28 TPI) for suppressor or muzzle device attachment Overall Length: 7.9 inches Height: 5.75 inches Width: 1.35 inches Weight: Approximately 27.9 ounces (unloaded) Frame: Polymer frame with an integrated accessory rail (MIL-STD 1913) for lights or lasers Slide: Flat Dark Earth (FDE) finish, optics-ready with a cover plate (compatible with most miniature red dot sights) Sights: Low-profile, fixed three-dot night sights (luminescent front sight and blacked-out rear sight) Trigger: Striker-fired with a smooth and crisp trigger pull, ambidextrous safety Safety: Trigger safety, passive firing pin block safety, and fully ambidextrous slide stop lever and magazine release Grip: Textured polymer grip with interchangeable backstraps (two additional backstraps included for custom fit) Magazine: Steel magazine with polymer base plate, reversible magazine release button Operating System: Recoil-operated with a Browning-type locked-breech design Finish: Flat Dark Earth (FDE) PVD (Physical Vapor Deposition) finish on the slide for enhanced durability and corrosion resistance

Caliber: .22 Magnum (WMR) Capacity: 12 rounds (tube magazine) Action: Lever-action Barrel Length: 19.25 inches Overall Length: 38.5 inches Weight: 6.75 pounds Stock: American walnut with a straight grip Sights: Adjustable semi-buckhorn rear sight, brass bead front sight Finish: Blued steel receiver and barrel Trigger: Single-stage trigger Safety: Hammer safety notch Other Features: Tubular magazine, drilled and tapped for scope mounting

Gauge: 12 gauge Chamber: 3 inches (76mm) Capacity: 15+1 rounds (2 3/4"), 13+1 rounds (3") Action: Gas-operated semi-automatic Barrel Length: 18.5 inches Overall Length: 28.34 inches Weight: Approximately 8 pounds (unloaded) Finish: Black oxide/hard anodized Stock: Reinforced polymer bullpup design Sights: Fixed front and rear flip-up sights (Picatinny rail for optics mounting) Choke: Fixed cylinder bore Trigger: Non-adjustable trigger with a positive reset Safety: Ambidextrous safety switch Operating System: Short stroke gas piston system with self-regulating gas valve Magazine: Rotating triple magazine tubes with a selector switch (feeds from the right, left, or center tube) Accessory Compatibility: Full-length Picatinny top rail and M-LOK compatible accessory slots on the forearm Other Features: Ambidextrous mag release, forward and rear sling attachment points, patented downward ejection system for ambidextrous use, rubber recoil pad.

Gauge: 12 gauge Chamber: 3 inches (also compatible with 2-3/4 inch shells) Capacity: 5+1 rounds (with 3-inch shells) Action: Pump-action Barrel Length: 18.5 inches (also available in 20 inches) Overall Length: Approximately 39.5 to 41 inches (depending on the barrel length and stock configuration) Weight: Approximately 6.5 to 7 pounds (depending on the configuration) Finish: Matte black or blued barrel and receiver Stock: Black synthetic stock and forend with a ribbed texture for improved grip Sights: Bead front sight (some models may have a ghost ring or rifle sights) Choke: Cylinder bore (non-threaded barrel) Trigger: Standard shotgun trigger Safety: Tang-mounted safety button Magazine: Tubular magazine with a capacity of 5 rounds plus one in the chamber Receiver: Aluminum alloy receiver Accessory Compatibility: Compatible with Mossberg 500 accessories and aftermarket upgrades Other Features: Dual extractors, twin action bars for smooth and reliable cycling, cross-bolt safety, sling swivel studs for attaching a sling, drilled and tapped receiver for adding optics or accessories.

Gauge: 12 gauge Chamber: 3 inches (also compatible with 2-3/4 inch shells) Capacity: 9+1 rounds (with 3-inch shells) Action: Gas-operated semi-automatic Barrel Length: 24 inches (also available in 22 inches) Overall Length: 44.75 inches Weight: Approximately 7.75 to 8.25 pounds (depending on configuration) Finish: Matte blue/black or black synthetic stock and forend Stock: Black synthetic with adjustable length of pull (LOP) and comb height Sights: Fiber optic front sight; rear sight is not included (typically used with optics) Choke: Accu-Choke System (includes extended choke tubes) Trigger: User-adjustable trigger system Operating System: Dual gas vent system for reduced recoil and improved cycling Magazine Extension: 10-round detachable magazine extension tube Receiver: Anodized aluminum receiver with JM Pro Series engraving Safety: Tang-mounted safety button Other Features: Oversized bolt handle and release button, enlarged loading port for quick reloading, vented rib barrel for improved sight alignment, drilled and tapped receiver for optic mounting.

Caliber: 9mm Luger (9x19mm Parabellum) Capacity: 15+1 rounds (also available in 10+1 rounds for restricted states) Action: Striker-fired, semi-automatic Barrel Length: 4 inches Overall Length: 7.44 inches Height: 5.35 inches Width: 1.30 inches Weight: Approximately 24 ounces (unloaded) Frame: Polymer frame with integral Picatinny rail for accessories Slide: Matte black finish, serrations at the front and rear for slide manipulation Sights: Three-dot sight system (white dots), drift-adjustable rear sight, and front sight Trigger: Striker-fired with a smooth and consistent pull, trigger safety Safety: Trigger safety, internal drop safety, and out-of-battery safety Grip: Textured ergonomic grip with interchangeable backstraps (small, medium, and large) Magazine: Steel magazine with a polymer base plate, reversible magazine release button Operating System: Recoil-operated with a locked-breech design Finish: Black nitride finish on the slide for corrosion resistance